SYSCREW 380-1260 AIR EVO CO HSE, Air Cooled Chillers have been designed to operate with R513A or R134a refrigerants. Nominal cooling capacity range from 366 to 1.241 kW.
Technical features
• 12 sizes
• Cooling capacity from 366 to 1241 [kW]
• 3 fans versions: Standard, HT (High Temperature), HPF (High Pressure Fans)
• Acoustic versions: Standard, S (Super Low Noise)
• R513A and R134a refrigerants
• Two refrigerant circuits with hybrid combination between inverter driven and fixed speed Screw compressors
• Screw compressors
• EC brushless fan motors
• Shell & Tubes evaporator
• Microchannel condenser coils
Standard features
• Set point timer/clock card
• Modbus protocol kit for BMS (RS485)
• Modbus protocol kit for BMS (ETHERNET)
• Fan speed control
• Back light display
• Compressor envelope control
• Double set-point
• Sequence phase control
• Electronic expansion valves
• Data logger
• Power supply without neutral
• Refrigerant R513A or R134a
• PED approval
• Stepless control
• Evaporator antifreeze electric heater
• Compressor box
• Compressor acoustic box (S version only)
• Water pump acoustic box (S version only)
• Left hand water connection
Factory installed options
• Bacnet protocol kit for BMS (RS485 or Ethernet)
• Compressor soft starter (valid only for fixed speed compressor)
• Power factor correction capacitors
• Compressor Star-Delta starting system (valid only for fixed speed compressor having buy default Part-Winding starting system)
• Mechanical gauges kit
• Compressor suction valve
• Compressor liquid injection
• Compressor oil cooler
• Compressor oil switch (standard on inverter driven screw compressor)
• Condenser coils with E-Coating anticorrosion treatment
• Finned tubes coils
• Chiller grilles
• Total heat recovery
• Desuperheater
• On board hydro kits without buffer tank, with 1 or 2 standard or high pressure pump(s), fixed or variable speed, and relevant accessories.
Field installed accessories
• Remote ON/OFF control
• ModBus protocol kit for BMS (RS485 or Ethernet)
• Remote keyboard panel
• netTune (managing a network of up to 6 units)
• Spring anti-vibration mounts for basic unit
• Spring anti-vibration mounts for internal hydro kit
• Flow switch
• Water filter
• Differential water pressure transducer
• Modulating by-pass valve
• Remote hydro kits with buffer tank, 1 or 2 low or high pressure pump(s), relevant accessories and with or with¬out tank antifreeze heater.
BIM models available at MagiCAD Cloud
Наименование | Холодопроизводительность | Коэффициент EER | Частота | Phases | Напряжение (номинальное) | Уровень звукового давления на расстоянии 1 м, наружный блок | Вес | Цена |
---|---|---|---|---|---|---|---|---|
SYSCREW 1060 AIR EVO CO HSE | 1 047,4 кВт | 3,15 W/W | 50 Hz | 3~ | 400 В | 80 дБ(А) | 8 124 кг | 7 |
SYSCREW 1160 AIR EVO CO HSE | 1 154 кВт | 3,12 W/W | 50 Hz | 3~ | 400 В | 80 дБ(А) | 8 508 кг | 7 |
SYSCREW 1260 AIR EVO CO HSE | 1 240,5 кВт | 3,04 W/W | 50 Hz | 3~ | 400 В | 80 дБ(А) | 8 643 кг | 7 |
SYSCREW 380 AIR EVO CO HSE | 365,7 кВт | 2,95 W/W | 50 Hz | 3~ | 400 В | 77 дБ(А) | 3 747 кг | 7 |
SYSCREW 440 AIR EVO CO HSE | 443 кВт | 3,1 W/W | 50 Hz | 3~ | 400 В | 78 дБ(А) | 4 117 кг | 7 |
SYSCREW 510 AIR EVO CO HSE | 500,2 кВт | 3,02 W/W | 50 Hz | 3~ | 400 В | 79 дБ(А) | 4 651 кг | 7 |
SYSCREW 590 AIR EVO CO HSE | 565,8 кВт | 3,12 W/W | 50 Hz | 3~ | 400 В | 79 дБ(А) | 4 995 кг | 7 |
SYSCREW 660 AIR EVO CO HSE | 643,5 кВт | 3,12 W/W | 50 Hz | 3~ | 400 В | 79 дБ(А) | 5 392 кг | 7 |
SYSCREW 730 AIR EVO CO HSE | 704,3 кВт | 3,08 W/W | 50 Hz | 3~ | 400 В | 80 дБ(А) | 5 931 кг | 7 |
SYSCREW 810 AIR EVO CO HSE | 778,1 кВт | 3,07 W/W | 50 Hz | 3~ | 400 В | 80 дБ(А) | 6 255 кг | 7 |
Производитель: Systemair | Страна происхождения: Швеция | Цена: от 7.00 руб. |