Высокотемпературные центробежные EC-вентиляторы AXZENT EC
Housing made from galvanized steel. Flanges according to Eurovent 1/2 delivers additional stability. Equipped with EC motors and optimzed centrifugal impeller ensuring maximum performance and efficiency.
EC-motor, high level of effciency
Inline airflow direction
Up to 120°C medium temperature, continuous operation
Easy to maintain and reliable
Motor outside the air stream
Spun flanges according to Eurovent 1/2
Long casing, pre-galvanized steel
EC technology is intelligent technology; using integral electronic control which eliminates the slip losses in the motor and ensures that the motor always runs at optimal load and guarantees that the proportion of energy utilized effectively is many times higher and the energy usage considerably lower compared with AC motors. EC fans are notable for their economical use of energy and excellent ease of control. They can be varied in speed to match the airflow demand, and operate at high efficiency levels. For the same air volume, they consume distinctly less energy than AC fan drives. Another special feature of EC fans is their energy-saving potential not only at full load, but especially at part-load. When operating at part load, the energy used is much lower than with an asynchronous motor of equivalent output. Reduced energy usage guarantees a drop in operating costs. The power electronics are integrated in the motor housing.
All models have one potential-free terminal for error message. All motors are suitable to be used for 50/60Hz. The input voltage for single phase units can vary between 200 and 277V, for three phase untils can very between 380 and 480V. Speed control by a 0-10V signal. Every motor has an output voltage of 10V for an external potentiometer or sensor. The motor is suspended on effective vibration dampers.
All AxZent fans have new optimized and high efficient HD impellers with backward curved blades, manufactured from aluminium.
The long casing is manufactured from pre-galvanized steel and has spun flanges according Eurovent 1/2, for direct installation in duct systems.
Технические характеристики
| Наименование | Напряжение (номинальное) | Частота | Phases | Потребляемая мощность | Потребляемый ток | Скорость вращения рабочего колеса | Расход воздуха | Температура перемещаемого воздуха | Макс. температура перемещаемого воздуха, при регулровании скорости | Уровень звукового давления на 3 м (20м², сэбин) | Уровень звукового давления на 4 м (свободное поле) | Класс защиты, двигатель | Класс изоляции | Размер воздуховода, Круглый, вход | Вес | Тип двигателя | Цена |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AxZent 400EC | 230 В | 50, 60 Hz | 1~ | 183 Вт | 0,78 A | 1 512 об/мин | макс. 2 246 м³/ч | макс. 120 °C | 120 °C | 52 дБ(А) | 0 дБ(А) | IP55 | B | 400 мм | 34,5 кг | EC | 151585 |
| AxZent 400EC-L | 400 В | 50, 60 Hz | 3~ | 730 Вт | 1,26 A | 2 414 об/мин | макс. 3 438 м³/ч | макс. 120 °C | 120 °C | 66 дБ(А) | IP55 | B | 400 мм | 35 кг | EC | 174582 | |
| AxZent 450EC | 230 В | 50, 60 Hz | 1~ | 373 Вт | 1,61 A | 1 509 об/мин | макс. 3 409 м³/ч | макс. 120 °C | 120 °C | 56 дБ(А) | 0 дБ(А) | IP55 | B | 450 мм | 39 кг | EC | 170739 |
| AxZent 500EC | 230 В | 50, 60 Hz | 1~ | 613 Вт | 2,57 A | 1 460 об/мин | макс. 4 957 м³/ч | макс. 120 °C | 120 °C | 57 дБ(А) | 0 дБ(А) | IP55 | B | 500 мм | 53,5 кг | EC | 239974 |
| AxZent 560EC | 400 В | 50, 60 Hz | 3~ | 991 Вт | 1,61 A | 1 410 об/мин | макс. 6 653 м³/ч | макс. 120 °C | 120 °C | 59 дБ(А) | 0 дБ(А) | IP55 | B | 560 мм | 69 кг | EC | 245037 |
| AxZent 630EC | 400 В | 50, 60 Hz | 3~ | 2 006 Вт | 2,95 A | 1 505 об/мин | макс. 9 382 м³/ч | макс. 120 °C | 120 °C | 72 дБ(А) | IP55 | F | 630 мм | 94,5 кг | EC | 313967 |
| Производитель: Systemair | Страна происхождения: Швеция | Цена: от 7.00 руб. |
;){kind=link}
Высокотемпературные центробежные EC-вентиляторы AXZENT EC Размер
;){kind=link}
Телефон: (495) 136-26-72
E-mail: zakaz.vensnab@yandex.ru
